Vol.62, No.8, 631 ~ 639, 2024
|
Title |
Synthesis of Mesoporous CuOx Using Inverse Micelle Sol-gel Process for NO₂ Gas Sensing |
Sung Gue Heo , Sangwoo Kim , Seok-jun Seo , Jae Jin Sim , Jiyeon Shin , Ali Mirzaei , Myung Sik Choi |
|
|
|
Abstract |
Nitrogen diOxide (NO₂) is a highly dangerous gas, mostly emitting emitted from fossil fuels, and a major contributor to air pollution. It has negatively effects affects on the human health as well asand contributes to environmental issues like acid rain. In this study, mesoporous CuOx nanoparticles (NPs) were successfully synthesized using a low-temperature inverse micelle sol-gel method. Subsequently, the synthesized NPs were annealed at temperatures of 250, 350, and 450 ℃. Advanced characterization of the synthesized samples revealed that upon with increasing the annealing temperature, the sizes of the NPs increased, whileereas their surface areas decreased. The sample annealed at 250℃ showed a remarkably higher surface area (161.85 m2/g) compared with the samples annealed at 350 ℃ (39.88 m2/g) and 450 ℃ (22.52 m2/g) thanks to finer particle sizes and a mesoporous nature. Resistive gas sensors incorporating these samples were successfully fabricated and tested for sensitivity towards both NO₂ (Oxidizing gas) and H2S (reducing gas) at 200 ℃. The sensor with the mesoporous CuOx NPs annealed at the lowest temperature (250 ℃) exhibited an enhanced response to NO₂ gas but no response to H2S. The strong response to NO₂ gas is considered to be due to the high surface area of the sensing layer which provides plenty of adsorption sites for gas molecules and the Oxidizing nature of NO₂ gas with high affinity to electrons. These findings highlight the effectiveness of the inverse micelle sol-gel method forin synthesizing mesoporous CuOx NPs for gas sensing, as well as the need for to optimizing optimize the annealing temperature to maximize the sensor response. |
|
|
Key Words |
mesoporous CuOx sub>, inverse micelle, gas sensor, NO₂ gas, sensing mechanism |
|
|
|
|