발간논문

Home > KJMM 논문 > 발간논문

Vol.62, No.7, 533 ~ 542, 2024
Title
Investigation on the Structural and Mechanical Properties of Al Foam Manufactured by Spark Plasma Sintering and Compression Molding Methods
최승혁 Seunghyeok Choi , 이상화 Sang-hwa Lee , 정재길 Jae-gil Jung , 이석재 Seok-jae Lee , 안태영 Tae-young Ahn , 최유송 Yu-song Choi , 손승배 Seung Bae Son
Abstract
Metal foam materials are used for various purposes including electrode materials, catalyst filters, and gas diffusion filters due to their porous structure. Increasing demand for metal foams has generated research to increase porosity as well as produce different pore sizes. The present paper illustrates a comparison of open-cell aluminum foams prepared using the space holder technique. The Al foams were fabricated by two different methods: spark plasma sintering (SPS) and the compression molding (CM) method. The effect of the content of sodium chloride particles, used as the space holder, as well as manufacturing technologies on the Al foam structure and their mechanical properties were investigated. The morphology and structure of the obtained Al foams were analyzed by scanning electron microscopy (SEM) and micro-computed tomography (CT). Compressive testing was performed to investigate mechanical properties. The porosity of the SPS Al foam sample was 61-74%, and was 60-72% for the CM sample. The compressive strength and Young’s modulus were 1.40 MPa, 1.41×10-2 GPa for the SPS sample and 0.9 MPa, 1.33×10-2 GPa for the CM sample, respectively. The space holder technique is a promising technique for fabricating metal foam materials for cathode current collectors in lithium-ion batteries applications.
Key Words
Al foam, Spark plasma sintering, Compression molding, Space holder technique, Powder metallurgy
| PDF
대한금속∙재료학회 (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 FAX : 02-557-1080 E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.