발간논문

Home > KJMM 논문 > 발간논문

Vol.61, No.4, 242 ~ 252, 2023
Title
Comparative Research on Corrosion Resistant Non-Skid Al and Al-3%Ti Coating Fabricated by Twin Wire arc Spraying
권한솔 Hansol Kwon , 박영진 Youngjin Park , 남욱희 Uk Hee Nam , 이은경 Eunkyung Lee , 변응선 Eungsun Byon
Abstract
To ensure the lifetime of marine constructions and the safety of workers and pedestrians, corrosion protective non-skid coating is an effective solution. However, the conventional polymer-based coating has some limitations. In this study, newly-suggested Al and Al-3%Ti coatings were deposited on high strength low alloyed steel substrate using twin wire arc spraying (TWAS). The static and dynamic friction coefficients of the Al-based coatings under dry and wet conditions were measured using portable friction testers. To evaluate the corrosion behavior under sea water conditions, a cyclic potentiodynamic polarization test (CPDP) and salt solution immersion test (SSIT) were performed with a 3.5% NaCl solution. To confirm the coating degradation, mechanical properties (Vickers hardness and adhesion strength) were compared before and after SSIT. The results showed that the TWAS Al-based coatings were well fabricated on HSLA steel and had the general microstructure of a thermal spray. The coatings provided excellent corrosion protection for the steel substrate and greatly increased the friction coefficient of the surface. The Vickers hardness slightly increased and adhesion strength decreased after SSIT. The microstructure observation revealed that the TWAS coatings had a bimodal structure induced by non-uniform droplet generation at the TWAS tips. After SSIT, some oxides formed on the surface and porous regions of the coatings. This indicated that the TWAS coating successfully provided corrosion protection and non-skid properties. (Received 17 October, 2022; Accepted 3 January, 2023)
Key Words
twin wire arc spray, TWAS, mechanical property, friction coefficient, cyclic potentiodynamic polarization, CPDP, salt solution immersion test, SSIT
| PDF
대한금속∙재료학회 (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 FAX : 02-557-1080 E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.