|
Vol.60, No.6, 478 ~ 488, 2022
|
| Title |
| Effect of Silica Nanoparticle Dispersion on Flexural Strength of Sand Mold with Sodium Silicate Binder |
| 김판성 Panseong Kim , 배민아 Min A Bae , 백재호 Jae Ho Baek , 제정호 Jung Ho Jae , 이만식 Man Sig Lee |
|
|
|
| Abstract |
| Sodium silicate solutions are used as an eco-friendly binder in the casting process. However, the strength of sand molds using the sodium silicate solutions is reduced because of their low humidity resistance. In this study, silica nanoparticles were added to a sodium silicate solution with a constant SiO2/Na2O ratio to improve the humidity resistance of the inorganic binder. The effects of the dissolution times and particle size of the silica on the flexural strength of the molds was also investigated. The physiochemical properties of the inorganic binders were characterized by viscometer, Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and scanning electron microscope (SEM). Sand molds for the flexural strength test were prepared by mixing artificial sand and inorganic binders. The addition of silica nanoparticles reduced the viscosity and water evaporation rate of the inorganic binders and improved the humidity resistance of the molds due to an increase in the SiO2/Na2O ratio. The flexural strength of the molds increased as the size of the silica nanoparticles increased, due to formation of discrete silica aggregates with high surface area. However, as the dissolution times of the silica nanoparticles increased, the strength of the molds decreased due to an enhanced Q2/Q3 ratio. Therefore, we suggest that the addition of silica nanoparticles will improve the humidity resistance of molds, and that varying the particle size and dissolution time of the silica nanoparticles affects the strength of the molds.
(Received 29 September, 2021; Accepted 10 February, 2022) |
|
|
| Key Words |
| dissolution time, flexural strength, humidity resistance, particle size, silica nanoparticle dispersion, sodium silicate solution |
|
|
 |
|
