| Abstract |
| Nodular graphite cast iron is used in the railway and automobile industries because of its excellent workability, abrasion resistance, mechanical strength, and hardenability. To use nodular graphite cast iron in harsh environments, it is essential to examine their friction-wear properties in conjunction with the surface hardness of the materials. Therefore, in this study, a pin-on-disk type method was used to investigate specimens whose surface hardness was improved by the addition of Sn alloying element, followed by high-frequency heat treatment. The results revealed that Sn inhibited the growth of nodular graphite by acting as a barrier to the movement of carbon and promoted the transformation of some matrix from ferrite to pearlite. In contrast, most of the matrix of the high-frequency heat treated specimen was transformed into pearlite. Consequently, the specimens prepared using both methods achieved higher surface hardness than the as-cast state. With regards to the friction-wear properties, the Sn added alloy exhibited a relatively weak matrix, and therefore, delamination of the surface and spalling on the nodular graphite occurred, with significant wear width and depth. In contrast, surface delamination was not observed in the specimen after high-frequency heat treatment.
(Received 7 February, 2022; Accepted 3 March, 2022) |
|
|
| Key Words |
| GCD600, Modification, high-frequency heat treatment, Microstructure, Friction-wear properties |
|
|
 |
|
