|
Vol.57, No.5, 279 ~ 289, 2019
|
| Title |
| Investigation of the Texture and Dislocation Behavior of AZ31 Magnesium Alloy Under Different Strain Rate Conditions |
| 이동기 Dong-gi Lee , 권준범 Jun-beom Kwon , 이현종 Hyun-jong Lee , 조수미 Su-mi Jo , 임영목 Young-mok Rhyim , 양원존 Won-jon Yang , 김양도 Yang-do Kim |
|
|
|
| Abstract |
| This study is concerned with the influence of strain rate on the plastic deformation behavior and microstructure variables of AZ31 magnesium alloy sheet. The tensile properties were measured at room temperature at a strain rate of 0.001 and 100 s-1 using a universal tensile testing machine and servo-hydraulic high-speed tensile test machine respectively. The microstructure was observed at strains of 5, 10, 15%, produced by tensile elongation. As the strain rate increased, the flow stress and the yield strength increased. The EBSD analysis showed that a texture of the (0001) basal plane was formed parallel to the rolled plate and texture was formed at random in the (10□0) non-basal plane. Double twinning was not observed and extension and contraction twinning were observed at all strain rate levels. The fraction of twin boundaries were increased as strain rate increased. TEM analysis determined that the dislocation density of the specimen strained by 1% at a strain rate of 100 s-1 was higher than that of a strain rate of 0.001 s-1. In addition, the < c+a >dislocation was found at all strain rate levels. These results show that the deference in elongation of the AZ31 Mg alloy is dependent on strain rate.
(Received October 4, 2019; Accepted March 18, 2019) |
|
|
| Key Words |
| AZ31 magnesium alloy, high-speed tensile test, EBSD analysis, texture, TEM analysis, pyramidal slip |
|
|
 |
|
