발간논문

Home > KJMM 논문 > 발간논문

Vol.54, No.11, 802 ~ 808, 2016
Title
The Effects of Cooling Rate on the Microstructure and Mechanical Properties of Ti40Zr10Cu36Pd14 Metallic Glass Matrix Composites
박선용 Seon Yong Park , 임가람 Ka Ram Lim , 나영상 Young Sang Na , 김승언 Seong Eon Kim , 최윤석 Youn Suk Choi
Abstract
In this paper, we demonstrate that the microstructure and mechanical properties in the Ti40Zr10Cu36Pd14 alloy can be tailored by controlling the cooling rate during solidification. A lower cooling rate increases the volume fraction of crystalline phase such as B2 but decreases the free volume of the glassy matrix. The increase of the B2 volume fraction can dramatically enhance the toughness of the composites, since the B2 phase is relatively ductile compared to the glassy matrix and seems to have good interface stability with the matrix. From the experimental results, it was found that there is a transition point in the plasticity of the composites depending on the cooling rate. Here, we explain how the toughness of the composites varies in accordance with the cooling rate in the Ti40Zr10Cu36Pd14 alloy system. (Received April 22, 2016; Accepted May 25, 2016)
Key Words
metallic glass matrix composite, cooling rate, B2 phase, microstructure, mechanical properties
| PDF
대한금속∙재료학회 (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 FAX : 02-557-1080 E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.