발간논문

Home > KJMM 논문 > 발간논문

Vol.37, No.7, 882 ~ 887, 1999
Title
Research Paper / Materials Processing : Study of Heat Effect on the Microstructure and Mechanical Workability of Continuously Cast Cu-9Ni-6Sn Alloys
한승전Seung Zeon Han, 김홍일Hong Il Kim, 이정무Jung Moo Lee, 정윤철Yun Chul Jung, 김창주Chang Joo Kim
Abstract
The effects of Heat-treatment on the mechanical workability of continuously cast Cu-9Ni-6Sn alloys have been investigated and the following results were obtained. The mechanical workability of Cu-9Ni-6Sn alloys are strongly dependent on the temperature of heating. The surface cracks of specimen were not produced over the temperature of 650℃ but occurred below 650℃. Sn-rich inclusion formed during solidification influenced the mechanical workability. Especially Sn-rich inclusion at grain-boundary induced crack initiation. Over the holding temperature of 650℃, the grain boundary pore made by removing inclusion initiated crack because the pores acted as defect at the grain boundary. Below 650℃, Sn-rich inclusions were still remained at the grain boundary, therefore workability improved due to reduction of defects at the grain boundary.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.