발간논문

Home > KJMM 논문 > 발간논문

Vol.39, No.3, 360 ~ 367, 2001
Title
Research Paper / Mathematical Modeling : Finite Element Analysis of Equal Channel Multi - Angular Pressing ( KCMAP )
서민홍Min Hong Seo,김형섭Hyoung Seop Kim
Abstract
In this paper, we studied the plastic deformation behavior of specimens during equal channel multi-angular pressing(ECMAP) which gave a total strain of approximately 2 on a single pass through the die, using the two dimensional rigid-plastic finite element method. The ECMAP process was explained in terms of two stages based on the corner filling procedure and the calculated load curve. Numerical simulations an annealed pure copper show that the first corner gap which occurred during stage I doesn`t occur during stage II due to the back pressure effect developed by the second corner deformation. This back pressure effect results in the local severe shear at the bottom of the ECAP samples of the routes A and C. The strain distribution within the deformed samples using both the routes A and C of ECMAP becomes more homogeneous than that of the single pass ECAP.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.