발간논문

Home > KJMM 논문 > 발간논문

Vol.38, No.3, 480 ~ 488, 2000
Title
Pesearch Paper / Surface Treatment : Measurements of Adhesion Strength of Cu - based Ledfame / EMC Interfaces
이호영Ho Young Lee,유진Jin Yu
Abstract
Copper-based leadframe sheets were oxidized in hot alkaline solutions to form brown and black oxide layers on the surface, molded with the epoxy molding compound (EMC), and machined to form sandwiched double cantilever beam (SDCB) and sandwiched Brazil-nut (SBN) specimens. The two types of specimens were designed to measure the adhesion strength of the leadframe/EMC interfaces under quasi-Mode I (G_(IC)) and mixed Mode loadings (G_c), respectively. Results showed that both oxide layers enhanced G_(IC) to the level of ∼80 J/㎡ at two minutes of the oxidation time. G_c increased parabolically with phase angle when the sign of phase angle was positive. For both cases, interface crack began to kink into EMC when G_c was ∼150 J/㎡.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.