발간논문

Home > KJMM 논문 > 발간논문

Vol.35, No.3, 359 ~ 367, 1997
Title
Research Paper - Composite Materials : Microstructure and Mechanical Properties of Die Cast Sic p / Al Alloy Composites
이태원Tae Won Lee, 서병권Byoung Kwon Suh, 이두면Doo Myun Lee, 이지환Chi - Hwan Lee
Abstract
This study was focused to investigate the effect of die casting on the microstructure and mechanical properties of SiC_p(10 and 20vol.%)/Al alloy composites. Die casting was performed using the preheated mold at the pouring temperature of 650∼700℃ under the pressure of 916 ㎏f/㎠. The speeds of slow and high speed injection were 0.3∼0.4 and 1.4 m/s, respectively. It was found that the SiC particles were homogeneously distributed in refined Al matrix. This results from the rapid mixing of molten Al and SiC particles during injection and the improvement of segregation due to rapid solidification. Therefore, the tensile strength of SiC_p/Al alloy composites die cast at 700℃ appeared to be superior to that of the composites die cast at 650℃ with 10 and 20 volume fractions.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.