발간논문

Home > KJMM 논문 > 발간논문

Vol.34, No.8, 1005 ~ 1013, 1996
Title
Research Paper - Solidification - : Microstructure Evolution of AISI 430 Stainless Steel Strip by Twin - Roll Strip Caster
최주태Ju Tae Choi, 김용희Yong Hee Kim, 오규환Kyu Hwan Oh, 나형용Hyung Yong Ra, 정성인Seong In Jeong, 윤종칠Jong Chil Yoon
Abstract
AISI 430 stainless steel strip was fabricated by laboratory scale twin-roll strip caster. Microstructure of ascast strip consists of ferritic α matrix, (Fe,Cr)_(23)C_6 carbides and lath martensite at grain boundary, observed in transmission electron microscopy. Martensite was transformed from retained austenite at grain boundary due to rapid cooling of strip casting. The martensitic formation can be suppressed by the slow cooling after roll nip point. The lower value of hardness at the strip surface was obtained because primary ferrite remained due to higher cooling rate. As it goes from center region to edge region, the solidification end point is located above average height and the white band zone at the central layer become wide. The zone of negative segregation results from squeezing out near the central layer of the liquid which has high phosphorus and sulfur content.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.