발간논문

Home > KJMM 논문 > 발간논문

Vol.32, No.1, 104 ~ 112, 1994
Title
Sliding Wear Behavior of Chromium Nitride Coated Free Machining Ti - 3Al - 2V Alloy
김용석Yong Suk Kim, 송진화Jin Hwa Song, 정재인Jae In Jeong, 이영백Young Pak Lee, 이용태Yong Tai Lee
Abstract
The sliding wear behavior of the chromium nitride (CrN and a composite CrN+Cr₂N) coated Ti-3Al-2V free machining titanium alloy against heat-treated tool steel was investigated. The wear test was carried out using a ring--on-disc type tester under dry and lubricated conditions. Under the applied stress of 6.5 MPa and dry wear condition the chromium nitride coatings started to be peeled off from the substrate through pitting and micro fragmentation processes. The hard debris of the detached and crushed coatings worked as abrasives, which accelerated the wear even though the coefficient of friction was lowered by them. The effect of precleaning, such as sputtering, on the wear resistance was more significant under the dry wear condition than under the lubricated condition. Under the lubricated condition the wear resistance of the coated specimen increased a lot compared with the dry condition and the variation of the friction load decreased. Good correlation between the wear rates and low coefficient of friction was also observed under the lubricated condition.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.