발간논문

Home > KJMM 논문 > 발간논문

Vol.18, No.2, 151 ~ 159, 1980
Title
Planar Anisotropy in Tensile properties of Aluminum and 2024 - T4 Aluminum Alloy .
이동녕Dong Nyung Lee, 김정수Joung Soo Kim
Abstract
Tensile strength, yield strength and elongation of aluminum and 2024 aluminum alloy strips were measured with various tensile directions to the rolling direction. Their preferred orientations were also determined using a pole figure device. A simple method of analysis was suggested for qualitative correlation between planar anisotropy of yield strength and preferred orientation of strip specimens. The analysis was made on the basis of an assumption that the yield stress is inversely proportional to an arithmetical average of Schmid factors for all slip systems. For cold rolled aluminum and recrystallized aluminum strip specimens, directionality of yield strength was qualitatively in agreement with the result analyzed by the method. For 2024-T4 aluminum alloy, the longitudinal tensile properties were superior to the transverse properties due to mechanical fibering.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.